1. How can I purchase your products?
Click on "Where to Buy" on the left navigation to find your nearest retailer or click on "Contact" and we'll be more than happy to help you.
Call + 44 (0) 1795 473 555 or email info@bagboy.co.uk
2. What are the benefits of the three wheel push cart?
Click here for the full list of benefits.
3. Is my Bag Boy product covered under warranty?
A full one year guarantee on all push carts and bags.
4. Do Bag Boy three wheel carts come with a brake?
Most Bag Boy three wheel push carts are equipped with a brake system. The brakes used are either foot actuated or engaged via a handle or lever attached to the main handle of the cart. All current brake systems are easily adjusted for wear over time. Instructions are included in the cart packaging to help you understand the correct procedure.
All Bag Boy carts fold for easy storage and transport in some fashion, but the method can vary. All carts are shipped with an owner's manual and instructions that outline the proper method for assembling and folding the cart completely.
6. Where can I find part diagrams for Bag Boy Carts?
Please see the Parts and Manuals section on our web site by clicking here.
7. How much do your carts weigh?
Automatic – 15.6 lbs
Mini – GT – 15 lbs
Express 240 – 17.7 lbs
8. How do I adjust the alignment on the front wheel of the Express Cart?
If you are pushing the cart and it veers to the left, face the cart and find the two adjustment screws (Allen screws) on either side of the bracket that holds the front wheel on. They will be at the ends of the bracket. You should have received an Allen wrench with your cart. If not, it's a 4mm wrench. Turn the right screw counter clockwise then the left screw clockwise. Turn them just a little at a time until the wheel straightens out. If your cart veers to the right when pushing it, reverse the directions above.
9. How do you remove the front wheel from the Express Cart to change the inner tube?
To change the tube, first you have to take the wheel off the bracket. To do this remove the entire front wheel assembly, whether by removing the two screws on the under side or by unlatching it, if you have the newer model. Remove the two Phillips head screws on both sides of the bracket that hold the wheel. The wheel will slide out of the bracket. It might require two people to do this, one holding the wheel and one holding the long part of the assembly and pulling the wheel off of the bracket. Once the wheel is off the bracket, you can change the tube.
10. What accessories do you carry?
Umbrella Holder
Click here to visit our accessories page